Wiring Guide

ManualsBrandsQmark ManualsBaseboard Heaters34" Hydronic Electric Baseboard Heater (120 Volt - 750 Watts)

1

2

3

4

5

6

7

STEP 10

•

Adjust wiring to fit inside the

junction box and install the

thermostat cover with screw.

STEP 11

•

Adjust the thermostat to the

lowest setting and turn the

power to the unit ON. Let the

unit set for 3 minutes, nothing

should happen. Adjust the

thermostat to the highest

setting, you should notice heat

in about a minute. You will

possibly notice a slight amount

of smoke coming from the unit.

This is normal, and will burn off

in a short period of time.

Finally adjust the thermostat to

your comfort level and let run.

The unit will cycle ON and

OFF at that temperature range.