Wiring Guide

STEP 10
•
Adjust wiring to fit inside the
junction box and install the
thermostat cover with screw.
STEP 11
•
Adjust the thermostat to the
lowest setting and turn the
power to the unit ON. Let the
unit set for 3 minutes, nothing
should happen. Adjust the
thermostat to the highest
setting, you should notice heat
in about a minute. You will
possibly notice a slight amount
of smoke coming from the unit.
This is normal, and will burn off
in a short period of time.
Finally adjust the thermostat to
your comfort level and let run.
The unit will cycle ON and
OFF at that temperature range.