Manual

Maintain minimum clearances of:
– 24” (610mm) floor, sides, and back.
–
72” (1829mm) front
Part No. 5200-2487-003
04/10
ECR 38749
Model No. Volts Watts Amps Element Dimensions Weight
Qty. Height Width Length
in. (mm) in. (mm) lb. (kg)
RR22012A 120 2000 16.7 2 3.75 (96) 11 (280) 25 (637) 12
RR35724A 240 5700 23.8 4 3.75 (96) 19 (484) 34 (866) 22
WARNING
!
VERIFY THE POWER SUPPLY VOLTAGE COMING INTO
THE HEATER MATCHES THE RATING PRINTED ON THE
HEATER NAMEPLATE BEFORE ENERGIZING.
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heating elements
which are warranted against defects in workmanship and materials for two years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration;
nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained in violation of the productʼs installation
instructions. All claims for warranty work must be accompanied by proof of the date of installation.
The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products to Marley
Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service center or the Marley
Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that such repair or replacement is
the exclusive remedy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MAR-
LEY ELECTRIC HEATING SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE,
TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives you spe-
cific legal rights, and you may also have other rights which vary from state to state.
For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the factory must be
accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization, include all catalog num-
bers shown on the products.
Figure 3
P
C
LAMPING
B
RACKET
TOP VIEW
C
LAMPING
B
RACKET
(DETAIL)
T
OP CROSS
B
AR
L
OWER
CROSS BAR
HOW TO OBTAIN WARRANTY SERVICE AND
WARRANTY PARTS PLUS GENERAL INFORMATION
1. Warranty Service or Parts 1-800-642-4328
2. Purchase Replacement Parts 1-800-654-3545
3. General Product Information www.marleymep.com
Note: When obtaining service always have the following:
1. Model number of the product
2. Date of manufacture
3. Part number or description
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA