User Manual for Business Bluetooth Headset Please read the instructions carefully while using this product
I. How to connect Connect to bluetooth devices 1. Power on： Press and hold the multi-function button until the indicator light flashes blue light, and you will hear the voice prompt "Power on" 2.
. Turn on the bluetooth function of the mobile phone/search the bluetooth device/select the corresponding model of headset to connect to the bluetooth. II. Charging the headset After being plugged into the power supply by using USB cable, the headset starts to charge. The charging voltage cannot be higher than 5V. During the charging, the red light will be on, and the blue light will be on after the headset is fully charged. III. How to wear 1.
2. Right way to wear 1. Put the headset firmly into your ear and bend the boom mic toward your mouth 2.
III. How to use 1.
2. Hang up the call: Single click the multi-function button of the headset to hang up 3. Reject the call: Long press the multi-function button for about 3S 4. Mute: During the call, single click the mute button to silence the microphone and the other party cannot hear any sound. Single click the mute button again to reactivate the microphone. 5. Redial: Double click the multifunction button of the headset to redial the last number 6. Music play/pause: Tap the multi-function button to play/pause music 7.
11.Connect two mobile phones; According to the pairing steps,turn off bluetooth device on mobile phone A after being successfully paired with headset, the headset enters the mode of being paired again into the state, turn off the headset after successfully pairing with mobile phone B, at this time, turn on the bluetooth device on mobile phone A, the headset will automatically connect the two mobile phones again after startup , any phone calls from mobile A or B can be answered by the headset IV.
V. Warning 1. The product is equipped with lithium battery. Please do not expose the product to intense sunlight, burn or throw it into the fire to avoid explosion. 2. This product can not be charged with a charger which output voltage is higher than 5V, otherwise it will burn out the headset by over-voltage. 3.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
