User guide

© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Cisco Validated Design Page 90
5.6.1 Example of a NetApp NFS Volume Configuration
Task
#
Description
1.
Login to the NetApp storage using a web browser and click on filerView. It starts the NetApp storage configuration
application.
2.
Once in the FilerView select the aggregates section and click add to create an aggregate. We created an aggregate out
of 46 disks and called it aggr1.
3.
Now from the volumes section, select add to add a volume. An Add volume wizard pops up.