User guide

© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Cisco Validated Design Page 86
5.5.4 Cisco UCS Manager Configuration
To enable boot from SAN from a Cisco UCS Manager perspective, do the following:
Ste
p #
Task description
1.
Create a boot policy in the ―Servers‖ tab. To do this, Select the policies and on the right plane
select boot policies and select ―Add‖ button. Enter name, select reboot on change, and don‘t
select ―enforce vHBA name‖.
2.
Add SAN Boot for primary. The vHBA is optional, it could be left blank and we do not have to
enforce the vHBA name.
3.
Add SAN boot for SAN Secondary