User guide

© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Cisco Validated Design Page 61
10
Create boot from SAN policies, adapter policies,
11
Create a service profile template using the pools, templates, and policies configured above.
12
After associating a server pool to the service profile template, just right click to deploy as many
service profile as you need and Cisco UCS Manager will automatically start configuring these new
service profile templates on the selected blade servers.
13
At this point, the servers are ready for OS provisioning, we would recommend setting up a PXE
server to fasten the OS install. Virtual media CD based OS installation is also possible.
When working with 4 GB -1333MHz DDR3 Low voltage dual rank DIMM it will show up as 1067 if you do not set
the performance mode in the policy. See the example below:
1. You will need to set the performance mode in the BIOS policy (now controlled from the UCSM 1.3(1i))
and reboot the server to take the effect and you will have 1333MHz speed on the memory DIMMs.
2. Configure a BIOS policy with everything being in platform-default and just change the default power-
saving-mode into performance-mode.