User guide

© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Cisco Validated Design Page 49
4. Select the vDisk.
5. Assign Virtual Desktop numbers and Host names.
6. Select desired Organization Unit where machines will be created in AD.
7. Assign Desktops to (existing) Desktop Delivery Controller Group (Group has to be created the first time
tool is run).
8. Review selections and start creation process
Once complete the XenDesktop Setup Wizard should be run again using the same process except a different
template should be selected and also start the Virtual desktop numbering from the next available host number (for
example, 121 using the example above).