Installation guide

4–Installation
Equipment Installation and Configuration
51031-00 A 4-3
Install the Adapter Drivers
To install the FCoE and Ethernet drivers:
1. Go to the QLogic Driver Downloads/Documentation page (Figure 4-1) at
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx
.
Figure 4-1. Driver Download Page Model Selection
2. In the table at the bottom of the page, select Converged Network
Adapters, the adapter model, your operating system, and then click Go.
3. On the download page under Drivers, select the driver and download it to
your system.
4. Follow the included instructions for installing the downloaded driver.