Product specifications

2 – Operations and Administration
Configuration and Monitoring Features
D000003-016 Rev. A 2-53
A
Automatically starting the Fabric Manager
To enable the Fabric Manager to automatically start at boot time:
1. From the menu, click Subnet Manager.
2. Click Configuration. The Subnet Manager Configuration window is displayed:
Subnet Manager Configuration Window
Figure 2-79 Subnet Manager Configuration Window
3. To configure the Fabric Manager to automatically start with each boot, click
Enabled.
NOTE: If the user wants to manually activate the Fabric Manager, click Disabled.
4. For MPFD 9080, 9120 and 9240 switches, in a redundant management
configuration, the Start On Slave option should be set to Disabled. In the event
that the Fabric Manager on the master spine is disabled, the Fabric Manager
on the slave spine will turn on automatically when it becomes the chassis
management spine.
5. Click Apply.
NOTE: For additional information on configuring the Fabric Manager, refer to the
Subnet Management section of Appendix D, Switch Command Line
Interface.