Product specifications

2 – Operations and Administration
Configuration and Monitoring Features
D000003-016 Rev. A 2-47
A
NOTE: For those fields with a “Percent of Max” time unit, the user may
enter a number from 0 to 100. For those fields with a “1 Second”
time unit, the user may enter a number from 1 to 65,535.
c. Click Apply.
NOTE: If any threshold is exceeded on any port, the port will be displayed
as red on the switch map and a warning message will be logged.
The following are descriptions for each field in the Set Field Thresholds area:
NOTE: The thresholds for the following four fields are set as a percentage of
maximum; that is the percentage of maximum port capacity, which
depending upon IB fabric configuration can be:
• 4X (10/20Gbps)
• 1X (2.5 Gbps)
portXmitDataThresh
The threshold for the number of 32-bit data words transmitted by the port.
portRecvDataThresh
The threshold for the number of 32-bit data words received by the port.
portXmitPktsThresh
The threshold for the number of data packets transmitted by the port.
portRecvPktsThresh
The threshold for the number of data packets received by the port.
NOTE: The thresholds for the following fields are set based upon the number of
error message which can occur in one second. The value can be from 1
to 65,535.
portSymbolErrThresh
The threshold for the number of times a 8B10B encoding violation, or a disparity
violation was detected on the port.
portLinkErrRecvThresh
The threshold for the number of times the link error recovery process happened
successfully on the port.
portLinkDownedThresh
The threshold for the number of times the link error recovery process failed on the
port.