Product specifications

2 – Operations and Administration

Configuration and Monitoring Features

2-28 D000003-016 Rev. A

Target Configuration Window Field Descriptions The following are

descriptions for each field in the Target Configuration window:

SNMP Target Addresses:

• Address Name

Specifies a unique, administrator-defined name the system uses to identify a row.

• Transport Domain

Specifies the transport type of the address contained in the

snmpTargetAddrTAddress object (e.g., 1.3.6.1.6.1.1 = udp,

1.3.6.1.4.1.1977.200.1 = tcp).

• Transport Address

Specifies the IP address in dotted decimal format.

NOTE: The combination of the Transport Domain and the Transport Address

determines the trap destination.

•Port

Specifies the TCP or UDP port that the SNMP trap is sent.

• Timeout

Specifies the time (in milliseconds) that the trap sender waits on a response

before re-sending the trap.

• Retry Count

Specifies the number of attempts to be made to send the trap after a timeout

condition occurs.

NOTE: Timeout and Retry Count are SNMP v2.c and above. Not applicable for

v1 traps.

•Tag List

Specifies which traps should be sent to this particular destination.

NOTE: RFC2233 specifies the link up/down traps. Including RFC2233 in the Tag

List specifies that the trap receiver will get link up/down traps.

• Parameters

Specifies a mapping to an entry in the SNMP Target Parameters table,

determining the version of SNMP to use.

• Storage Type

This field determines whether or not the entry is saved for each reboot of the

switch.