Product specifications

2 – Operations and Administration
Configuration and Monitoring Features
D000003-016 Rev. A 2-17
A
The Set Level button allows the user to set log level configuration parameters for
all software modules.
To set log levels:
1. From the menu, select Logging.
2. From Logging, select Set Level. The Log System Configurator (Device Tab)
window is displayed:
Figure 2-27 Log System Configurator (Device Tab)
The Device tab presents current log level configuration settings for the following
software modules:
• RAM = The circular log buffer contained in memory. To access the contents
of this buffer, use the Chassis Viewer View Log button
• Syslog = Messages that are sent to the syslog host specified on the Syslog
tab.
From this screen, the user can change any of the log level settings for a specific
software module by clicking on the Configure button, which displays a configuration
screen:
Figure 2-28 Device Tab: Software Module Configurator
To change any Log Level settings:
1. Click the On-Off checkbox to the right of the setting.
2. Click the Apply button to save any changes.