Product specifications

2 – Operations and Administration
Chassis Viewer
2-12 D000003-016 Rev. A
S
• Switch component LED information for chassis status, chassis SMA, fan and
power supplies.
• Slot-based temperature and AC-power sensor data for the internal switching
complex.
Figure 2-23 LEDs and Sensors Tab
NOTE: For a detailed explanation of physical LEDs on the hardware components,
please refer to the section “9120 Component LEDs” on page 2-20.
System Tab
The System tab displays overall system information for the applicable hemisphere.
This information includes the following items:
Out of Band LAN IP
The IP address of the switch. Note that changes to this field only take effect after a
switch power cycle (i.e., shutting down the switch and powering it back up). The IP
address of the switch can be changed by the administrator.
Net Mask
The current net mask settings for the Chassis. Note that changes to this field only
take effect after a chassis power cycle (i.e., shutting down the chassis and powering
it back up). The net mask of the chassis can be changed by the administrator.
System Description
A read-only textual description of the system.
IB Node Description
Assigned by the administrator, the IB node description is an IB fabric-applicable
name that will be displayed within QuickSilver Fabric Viewer. Note that changes to
this field will only take effect after the chassis is rebooted. To reset this field to the
default setting, click the Field Default button.