Product specifications

4 – EVIC Configuration and Monitoring Features
Logging
4-4 D000003-016 Rev. A
S
1. From the menu, select Logging.
2. From Logging, select Set Level. The Log System Configurator (Device Tab)
window is displayed:
Figure 4-6 Log System Configurator (Device Tab)
The Device tab presents current log level configuration settings for the following
software modules:
• RAM = The circular log buffer contained in memory. To access the contents
of this buffer, use the Chassis Viewer View Log button
• Syslog = All output messages are saved to the syslog host. If a log level is
ON, that type of message is sent to a syslog server. The syslog server is
defined at the switch chassis level within Syslog Host tab of the Logging/Set
Level submenu.
From this screen, the user can change any of the log level settings for a specific
software module by clicking on the Configure hyperlink, which displays a
configuration screen:
Figure 4-7 Device Tab: Software Module Configurator
To change any Log Level settings:
1. Click the On-Off checkbox to the right of the setting.
2. Click the Submit button to save any changes.
The following list describes each of the Log Level configuration parameters.