Product specifications

3 – FVIC Configuration and Monitoring Features
Fibre Channel Configuration
3-34 D000003-016 Rev. A
S
 Down: Indicating Attention/Error - that is, the device is a configured
device - but the FVIC card was unable to establish a connection to the
device.
• Port Number
Indicates the port numbers on the FVIC.
• N Port ID
N Port ID is a 24-bit address that identifies the target. The Fabric Controller
dynamically assigns the N Port ID to the target. The N Port ID displayed
in this field is the target ID and designates the address of the target on the
SAN.
• Node WWN
A unique 64-bit identifier that is assigned by the device vendor.
•Port WWN
A unique 64-bit identifier that is assigned by the device vendor.
• In Frame Size
Indicates the size of frames that is sent to the FVIC card from the SAN.
The size is reported in bytes. Valid values are:
 128
 512
 1024
 2048
• Out Frame Size
Indicates the size of frames that the FVIC card sends to the devices on
the SAN.
• Class of Service
Indicates the Fibre Channel Class of service. May be either Class 2 or
Class 3.
• Total Requests
Total number of requests to a target device
• Succeeded Requests
Total number of successful requests to a target device.
• Failed Requests
Total number of failed requests to a target device.
• Outstanding Requests