Product specifications

3 – FVIC Configuration and Monitoring Features
Fibre Channel Configuration
D000003-016 Rev. A 3-31
A
Link Width Enabled:
Indicates actual link width as opposed to the supported link width.
Link Width Supported:
Indicates the link width in terms of multipliers of 2.5 Gbit/sec full duplex serial links
supported by the port.
Active Link Speed:
Indicates the speed of the full duplex serial link. This is either 2.5Gbps (single data
rate, or SDR), or 5.0Gbps (double data rate, or DDR).
Link Speed enabled:
Indicates the actual link speed as opposed to the supported link speed. This could
be 2.5Gbps (SDR), 5.0Gbps (DDR) or both.
Link Speed supported:
The supported link speed of the port. This could be 2.5Gbps (SDR), 5.0Gbps (DDR)
or both.
InfiniBand Statistics:
Transmit 32 Bit Words:
The number of 32-bit data words transmitted by the port, not including flow control
and VCRC data.
Receive 32 Bit Words:
The number of 32-bit data words received by the port, not including flow control and
VCRC data.
Transmit Packets:
The number of data packets transmitted by the port, not including flow control
packets.
Receive Packets:
The number of data packets received by the port, not including flow control packets.
Symbol Errors:
The number of times a 8B10B encoding violation, or a disparity violation was
detected. If multiple errors are detected simultaneously (in more than one lane), the
counter only increments by one. The value of the counter is not incremented past
255. The Performance Manager may reset and/or consolidate the results of this
counter.