Product specifications

3 – FVIC Configuration and Monitoring Features

Fibre Channel Configuration

3-30 D000003-016 Rev. A

1. From the Statistics submenu, select IB Port Stats. The IB Port Statistics window

is displayed:

Figure 3-52 FVIC IB Port Statistics

NOTE: Ports 11 and 12 of the FVIC (e.g L01P11 and L01P12) represent the ports

between the switch chip on the FVIC and one of the FVIC internal HCA

chips.

Port Statistics Field Descriptions

Link State:

Indicates whether the InfiniBand link associated with the physical port is up or down.

Possible values are no state change, down, init, armed, active, and unknown.

Physical State:

Indicates whether the internal connection to the InfiniBand port is up or down.

Possible values are No State Change, Sleep, Polling, Disabled, Training, Up,

and Error Recovery.

Link Down Default:

Indicates the default down state as set by the Fabric Manager. Possible values are

No State Change, Sleep, Polling, and Unknown.

Active Link Width:

Indicates the bandwidth of the link on the backplane. The bandwidth is specified as

a multiplier of 2.5 Gbit/sec full duplex serial links. As an example, 4X specifies a

bandwidth of 10 Gbit/sec.

NOTE:Values of 1X are possible in this field with 4X IB cables if poor cable

connections or defective 4X IB cables are used.