Installation guide

2 – Installation
Installation Tasks
2-10 D000024-001 Rev. B
S
Four Post Shallow-Depth Rack
1. Install the hat rails to each side of the switch, using four (4) #6-32 screws per
rail. Rails are marked Left Side and Right Side. The switch can be
flush-mounted (holes circled green) or recessed mounted (holes circled red).
Figure 2-6 9024-FC Hat Rails
2. Install eight (8) cage nuts into the rack posts, two (2) cage nuts per post. Install
the switch into a rack and fasten to cage nuts using rack mounting screws, two
(2) per side.
3. Install C-rails by sliding into the corresponding hat rails on the switch. Fasten
to cage nuts with rack mounting screws, two (2) per side.
Figure 2-7 9024-FC Four Post Shallow Rack Mounting