Installation guide

2 – Installation
Installation Tasks
D000024-001 Rev. B 2-7
A
9024-FC Installations
This section describes the various rack mounting options for the 9024-FC:
 Standard-depth rack - distance between the front and back mounting posts
is ~28" (700mm). Mounting rails are adjustable to accommodate racks with
26"-33" between mounting posts.
 Two post mounting
 Four post mounting
 Shallow-depth rack - distance between the front and back mounting posts is
~16" (400mm). Mounting rails are adjustable to accommodate racks with
14"-20" between mounting posts.
 Four post mounting (both flush and recessed)
Two Post Standard-Depth Rack
1. Install the mounting bracket to each side of the switch (chassis port side), using
three (3) #6-32 screws per bracket
Figure 2-1 9024-FC Mounting Bracket
2. Install cage nuts into the rack posts, two (2) cage nuts per post. Install the switch
into a rack and fasten to the cage nuts using rack mounting screws, two (2) per
side.
Figure 2-2 9024-FC Two Post Mounting