Installation guide

2 – Installation
Installation Tasks
D000024-001 Rev. B 2-5
A
9024-FC: 2 Post Standard-Depth Rack Mounting
• Kit Mounting Brackets containing:
• One pair mounting L brackets
• #6-32 screws
• Kit Mounting Hardware 3/8” Square Hole containing:
• #10-32 rack mounting screws
• Caged nut adapters for square-holed racks
9024-FC: 4 Post Standard-Depth Rack Mounting
• Kit Mounting Brackets containing:
• One pair (left and right) of rack mounting brackets
• One pair of hat rail assemblies
• #6-32 screws
• Kit Mounting Hardware 3/8” Square Hole containing:
• #10-32 rack mounting screws
• Caged nut adapters for square-holed racks
9024-CU, 9020 and 9040
• Kit Mounting Rails containing:
• One pair of bottom support rail assemblies
• One pair of hat rail assemblies
• Kit Mounting Hardware 3/8” Square Hole containing:
• #10-32 rack mounting screws
• Caged nut adapters for square-holed racks
9080, 9120 and 9240
• Kit Mounting Rails containing:
• One pair (left and right) of bottom support rail assemblies
• One pair of top support rail assemblies (9240 only)
• One pair of lower mounting bracke (9080, 9120 and 9240).
• Two heyclips (9080 and 9120)
• Four heyclips (9240 only)
• Kit Mounting Hardware 3/8” Square Hole containing:
• #10-32 rack mounting screws