Product specifications

2 – Switch Command Line Interface
Groups and Commands
2-64 D000025-002 Rev. A
S
Sample Output:
NOTES: Use this command to tune the SM to handle the configured fabric size.
This should be expressed in terms of the upper limit of HCA ports on the subnet.
Setting this value will not take effect until the Subnet Manager is restarted.
smTopoErrorThresh
Set/display the error threshold for a topology sweep.
Syntax:
Options:
Sample Output:
NOTES: Sets the maximum number of errors the SM may encounter during a sweep
before abandoning the sweep.
smTopoAbandonThresh
Set/display the max consecutive times the SM can abandon a sweep due to too many errors.
Syntax:
Options:
Sample Output:
-> smSubnetSize 288
Subnet Size: 288
smTopoErrorThresh [threshold]
None.
-> smTopoErrorThresh 100
Set topology error threshold to:100
smTopoAbandonThresh [threshold]
None.
-> smTopoAbandonThresh 3
Set topology sweep abandonment threshold to:3