Product specifications

2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A 2-61
A
NOTES: Use this command to set the SM management key. SM must be offline
and mkey value is up to 8 byte hex.
smOptionConfig
Use this command to configure support for non-default modes of operation.
Syntax:
Options:
Sample Output:
NOTES: Use of these options without explicit direction may cause the fabric to be
inoperable.
smOptionConfig [clear | default | [def-mcgrp-create]
[dyn-plt]]
clear
Clears all set options.
default
Enable the default set of options (i.e., def-mcgrp-create and dyn-pit).
def-mcgrp-create
Auto create default multicast group. If using only this option, dyn-pit will be disabled.
dyn-pit
Enable dynamic packet lifetimes for pathrecord queries. If using only this option,
def-mcgrp-create will be disabled.
-> smOptionConfig dyn-plt
[dyn-plt] Dynamic packet lifetime support is enabled