Product specifications

2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A 2-59
A
smShowSMParms
Display subnet manager parameters switch lifetime, HOQ lifetime, VLStall val, pkt lifetime, and dynamic
PLT.
Syntax:
Options:
Sample Output:
NOTES: Use this command to display a sampling of subnet manager parameters.
smPKeys
Configure a partition key (PKey) in the PKey table.
Syntax:
Options:
smShowSMParms
None.
-> smShowSMParms
SM priority is set to 4
SM LMC is set to 0
SM sweep rate is set to 300
SM max retries on receive set to 3
SM max receive wait interval set to 250 millisecs
switchLifetime set to 15
HoqLife set to 9
VL Stall set to 5
packetLifetime constant is set to 18
Dynamic PLT ON using values: 1 hop=16, 2 hops=17, 3 hops=17, 4 hops=18,
5 hops=18, 6 hops=18, 7 hops=18, 8+hops=19
SM DBSync interval set to 900
SM topology errors threshold set to 0, max retry to 3
smPKeys [index] [pkey] [description]
index
PKey index.
pkey
Pkey 16 Bit value.
description
User-defined description of the PKey.