Product specifications

2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A 2-51
A
NOTES: The sweep rate determines how often the subnet manager scans the fabric
for changes and events.
bmSetSweepRate
Set/display the sweep rate of the baseboard manager.
Syntax:
Options:
Sample Output 1:
Sample Output 2:
NOTES: The sweep rate determines how often the baseboard manager scans the
fabric for changes and events.
smForceSweep
Force a fabric sweep by the embedded subnet manager.
Syntax:
Options:
Sample Output:
NOTES: This command has no output message. To see the resulting sweep
information, the "Info" level log messages must be turned on.
bmSetSweepRate [sweepRate}
sweepRate
The sweep rate (in seconds) of the baseboard manager. Valid values are 30-86400, or 0 to
turn the sweep off.
-> bmsweeprate
The BM sweep rate is 86400 seconds
-> bmsweeprate 500
The BM sweep rate has been set to 500 seconds
smForceSweep
None.
-> smForceSweep