Product specifications

2 – Switch Command Line Interface
Groups and Commands
2-50 D000025-002 Rev. A
S
smPriority
Set/display the priority of the subnet manager.
Syntax:
Options:
Sample Output 1:
Sample Output 2:
NOTES: The priority of the Subnet Manager(SM) determines which subnet manager
will become the master SM for the fabric. Zero is the lowest priority and fifteen is
the highest. The SM with the highest priority will become the master SM for the fabric.
smSweepRate
Set/display the sweep rate of the subnet manager.
Syntax:
Options:
Sample Output:
smPriority
priority-value
priority must be between 0 and 15, inclusive.
-> smPriority
The SM Priority is 0
-> smPriority 4
SM Priority has been set to 4
smSweepRate [sweepRate]
sweepRate
The sweep rate (in seconds) of the subnet manager. Valid values are 3-86400, or 0 to turn
the sweep off. The sweepRate is the interval between the end of one sweep and the start of
the next sweep.
-> smSweepRate 300
The SM sweep rate has been set to 300 seconds