Product specifications

2 – Switch Command Line Interface
Groups and Commands
2-48 D000025-002 Rev. A
S
smConfig
Configure startup parameters of the embedded subnet manager.
Syntax:
Options:
Sample Output 1:
Sample Output 2:
NOTES: Use this command to configure the subnet manager. Note that for
runtimetype parameters the Subnet manager may need to be restarted for them to
take effect.
smConfig [startAtBoot yes|no] [startOnSlaveCmu yes|no]
startAtBoot
Start the subnet manager at chassis boot
startOnSlaveCmu
Start subnet manager on the slave CMU
-> smConfig
Start at boot? [Y]
Start on slave CMU? [N]
MasterSpine1->
-> smconfig startAtBoot yes startOnSlaveCmu yes
Saving....
Saving complete...