Product specifications

2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A 2-41
A
Options:
Sample Output:
NOTES: Firmware update works by using ftp to retrieve the firmware file, then writes
the file to flash. Omitting any of the options causes the user to be prompted for the
information.
fwUpdateChassis
Updates the firmware for all cards in a chassis of a particular type, or everything.
Syntax:
Options:
slotnumber
The chassis slot numberto update.
host
The name of the host where the firmware file resides.
user
The FTP user name.
password
The FTP user password.
dir
After logging in, the directory to cd to.
filename
The name of the firmware file.
-> fwUpdateSlot 1
Enter 1 for FTP, 2 for local file: 1
Ftp Server IP Address:[192.168.0.195]
Ftp username:[ftp] xxxxx
Ftp password:[ftp] xxxxx
File Directory:[PATH TO FIRMWARE FILE]
File name:[9000.pkg]
fwUpdateChassis (all,management,evic, fvic) [noprompt]
[reboot]
(all,management,evic, fvic)
Type of card to update. See notes for details.
noprompt
Will not prompt the user for ftp information (uses the saved values).
reboot
Upon successful completion, reboots the updated cards .