Product specifications

2 – Switch Command Line Interface
Groups and Commands
2-34 D000025-002 Rev. A
S
NOTES: This routine displays the attached network interfaces for debugging and
diagnostic purposes. If ifName is given, only the interfaces belonging to that group
are displayed. If ifName is omitted, all attached interfaces are displayed.
routeShow
Displays the OOB LAN IP routes.
Syntax:
Options:
Sample Output:
ping
Send ping packets to a specified host.
Syntax:
Options:
routeShow
None.
-> routeShow
ROUTE NET TABLE
destination gateway flags Refcnt Use
Interface
----------------------------------------------------------------------
0.0.0.0 172.26.0.254 3 2 1470
mgmt_eth1
172.26.0.0 172.26.0.221 101 0 0
mgmt_eth1
----------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use
Interface
----------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 2 593 lo0
----------------------------------------------------------------------
ping [ipAddress] [packetCount]
[IpAddress]
The IP address of the network host to ping.
[packetCount]
The number of packets with which to ping the host (default is 5).