Product specifications

3 – Virtual I/O Command Line Interface
Groups and Commands
3-76 D000025-002 Rev. A
S
NOTE: 802.3ad allows for ports to be configured with an actor key, designating
which ports can be apart of the same aggregation (i.e., only ports with the
same actor key can be a part of the same aggregation, regardless of how
the partner's information matches up). This command modifies the Lacp
key for the specified port(s). The port parameter can be either a single port,
or a list of ports separated by spaces and enclosed in double quotes.
ethExtAggregationGet
Display the current aggregation information for the specified port(s).
Syntax:
Options:
Sample Output:
NOTE: Link aggregation can be configured on a per-port basis to be determined
automatically (via 802.3ad Lacp) or manually configured. This command
prints the current aggregation status for the specified ports. The port
parameter can be either a single port, or a list of ports separated by spaces
and enclosed in double quotes.
ethExtAggregationSet
Configure the specified External Ethernet port into the requested aggregation.
Syntax:
ethExtAggregationGet <port> or ethExtAggregationGet
"<port1> <port2> ..."
port
Display the current aggregation information for the External Ethernet port.
-> ethExtAggregationGet "1 2"
Port Alias Method Agg#
1 Ext-1 disabled 0
2 Ext-2 Lacp 0
ethExtAggregationSet <port> <aggIdx> or
ethExtAggregationSet "<port1> <port2> ..." <aggIdx>