Product specifications

3 – Virtual I/O Command Line Interface
Groups and Commands
3-44 D000025-002 Rev. A
S
Sample Output:
NOTE: To enable this feature, acquire the feature key from QLogic.
fcVirtPortPoolRem
Remove all Virtual Port entries.
Syntax:
Options:
Sample Output:
NOTE: WARNING: This operation will cause all active virtual ports to be
disconnected and all persistent virtual port information will be deleted. In
order to restore the virtual port capability, the feature key will need to be
re-entered.
-> fcVirtPortPoolCreate <license key>
Virtual Port Pool key accepted.
Virtual Port Pool Key: <license key>
Index | VirtPort WWN | PhyPort | Status | VirtPort Name
-----------------------------------------------------------------
0001 | 500066A0E2000199 | Unassigned | Inactive | WWN-0001
0002 | 500066A0E2200199 | Unassigned | Inactive | WWN-0002
0003 | 500066A0E2400199 | Unassigned | Inactive | WWN-0003
.
.
.
0126 | 500066AFE2A00199 | Unassigned | Inactive | WWN-0126
0127 | 500066AFE2C00199 | Unassigned | Inactive | WWN-0127
0128 | 500066AFE2E00199 | Unassigned | Inactive | WWN-0128
fcVirtPortPoolRem <KeyString>
KeyString
The encoded feature key that was previously used to enable the Virtual Port Pool.
->fcVirtPortPoolRem <KeyString>
The Virtual Port Pool was removed.