Product specifications

3 – Virtual I/O Command Line Interface
Groups and Commands
3-20 D000025-002 Rev. A
S
Sample Output:
fcPortTopologyGet
Retreive the Fibre Channel port topology settings.
Syntax:
Options:
Sample Output:
fcPortTopologySet
Change the Fibre Channel port topology settings.
Syntax:
-> fcPortSpeedSet 1 1
Setting speed to 1
Updated the topology. Note that the board needs to be rebooted in order for the
change to take effect
Admin Link Oper
Port Alias PortWWN NPortId Topology Speed Status Speed SFP
Status
Ext1 Ext-1 0x500066A1E0000133 0x010E00 Fabric 1G Up 4G OK
This Fibre Channel I/O device MUST BE REBOOTED to activate changes made with
fcPortSpeedSet
fcPortTopologyGet [port number]
port number
Displays the current topoloogy settings for a specified port.
-> fcPortTopologyGet
Admin Link Oper
Port Alias PortWWN NPortId Topology Speed Status Speed SFP
Status
Ext1 Ext-1 0x500066A1E0000133 0x010E00 Fabric Auto Up 4G OK
Ext2 Ext-2 0x500066A2E0000133 0x000001 Private Loop 4G Up 4G OK
Ext3 Ext-3 0x500066A3E0000133 0x010A00 Fabric Auto Up 4G OK
Ext4 Ext-4 0x500066A4E0000133 0x010D00 Fabric Auto Up 4G OK
Ext5 Ext-5 0x500066A5E0000133 0x010B00 Fabric Auto Up 4G OK
Ext6 Ext-6 0x500066A6E0000133 0x010C00 Fabric Auto Up 4G OK
Ext5 Ext-7 0x500066A7E0000133 0x010B00 Fabric Auto Up 4G OK
Ext6 Ext-8 0x500066A8E0000133 0x010C00 Fabric Auto Up 4G OK
fcPortTopologySet [PortNumber] [Topology]