Product specifications

2 – Switch Command Line Interface
Groups and Commands
D000025-002 Rev. A 2-101
A
Syntax:
Options:
Sample Output:
NOTE: With no arguments, this command displays the current NTP timeout
settings. This is the amount of time (in seconds) for the system to
wait for a response from the NTP server. This setting can be
configured by using the same command with the new timeout value
(in whole seconds) as the only argument. The default settings is 2
seconds. The NTP timeout value is not used on linecards or slave
CMUs.
timeNtpRefreshTime
Display or set the delay between syncing the clock via NTP.
Syntax:
Options:
Sample Output:
NOTE: With no arguments this command displays the current NTP refresh
time, which is the delay in seconds between attempts to sync the
clock via NTP. This value can be configured by using this same
timeNtpTimeout numSeconds
numSeconds
New timeout setting.
-> timeNtpTimeout
Current NTP timeout value: 2 seconds
-> timeNtpTimeout 3
Current NTP timeout changed to 3 seconds
timeNtpRefreshTime numSeconds
numSeconds
New refresh delay setting.
-> timeNtpRefreshTime
Current NTP refresh delay value: 60 seconds
-> timeNtpRefreshTime 50
Current NTP refresh delay changed to 50 seconds.