User`s guide

5 – Non-interactive Mode Commands
-stat (Display HBA Statistics)
5-12 SN0054621-00 B
Q
5.32
-stat
(Display HBA Statistics)
Type the following command to display the statistics for the specified HBA:
-stat <HBA No.>
See section 4.8.4 for a list of statistics that are displayed.
5.33
-netconf
(Display Network Settings)
Type the following command to configure the network settings:
-netconf <HBA No.> [IP <IP Address>] [IPNM <Subnet Mask>] [-IPGW
<Gateway Address>] [-IPDNS <DNS Address>]
Where:
Setting the IP address, subnet mask, or gateway turns off DHCP address resolution
for the IP, DNS, and SLP configurations if it is on. Setting the DNS address turns
off only DHCP address resolution for the DNS service if it is on.
5.34
-ipdhcp
(Configure IP Settings)
Type the following command to turn on DHCP address resolution to discover the
IP address, subnet mask, and gateway:
-ipdhcp <HBA No.>
If the HBA port had prior values set manually, the DHCP values override them.
IP <IP Address>
= Sets the IP address of the HBA.
IPNM <Subnet
Mask>
= Sets the subnet mask of the HBA.
-IPGW <Gateway
Address>
= Sets the gateway.
-IPDNS <DNS
Address>
= Sets the DNS address.