User`s guide

5 – Non-interactive Mode Commands
-delchap (Delete a CHAP Entry)
5-10 SN0054621-00 B
Q
The HBA will be reset after this command is issued.
5.26
-delchap
(Delete a CHAP Entry)
Type the following command to delete a CHAP entry:
-delchap <HBA No.> <CHAP>
The HBA will be reset after this command is issued.
5.27
-pinfo
(HBA Port Information)
Type the following command to display the port information for the specified HBA:
-pinfo <HBA No.>
5.28
-isns
(iSNS Settings)
Type the following command to configure the iSNS settings:
-isns <HBA No.> [iSNS IP Address]
When the [iSNS IP Address] parameter is not specified, the iSNS client on the
specified HBA port is disabled.
The HBA will be reset after this command is issued.
5.29
-gcr
(Get Crash Record)
Type the following command to obtain crash record information for the specified
HBA port:
-gcr <HBA No.> <Crash Output File>
5.30
-rdf
(Restore Default Firmware Settings)
Type the following command to restore the specified HBA port’s firmware values to
the factory defaults:
-rdf <HBA No.>
The HBA will be reset after this command is issued.