User`s guide

5 – Non-interactive Mode Commands
-edchap (Edit a CHAP Entry)
SN0054621-00 B 5-9
Q
5.22
-linkchap
(Assign a CHAP Entry to a Target)
Type the following command to link a CHAP entry to a target:
-linkchap <HBA No.> <CHAP No.> <Target ID>
The HBA will not be reset after this command is issued.
5.23
-addchap
(Add a CHAP Entry)
Type the following command to add a CHAP entry to the persistent CHAP table:
-addchap <HBA No.> <CHAP Name> <CHAP Secret> [-BIDI]
The optional parameter [-BIDI] indicates that the CHAP entry is BIDI
(bidirectional). When this parameter is not specified (default), the CHAP entry is
local.
The HBA will be reset after this command is issued.
5.24
-defbidi
(Add a Default BIDI CHAP)
Type the following command to add a BIDI CHAP entry to the specified HBA port:
-defbidi <HBA No.> <CHAP Secret>
The HBA will be reset after this command is issued.
5.25
-edchap
(Edit a CHAP Entry)
Type the following command to change the value of the specified CHAP entry:
-edchap <HBA No.> <CHAP> <Parameter>|<Parameter Alias> <Value>
[<Parameter>|<Parameter Alias> <Value> …]
The <Parameter>|<Parameter Alias> <Value> parameter pair can be repeated
to change multiple values; see table 5-3.
Table 5-3. CHAP Parameters
Parameter Parameter Alias Value
CHAPName CNAME character string
CHAPSecret CSECRET character string
CHAPBidi CBIDI on or off