User`s guide

5 – Non-interactive Mode Commands
-pu (Unbind Target)
5-6 SN0054621-00 B
Q
5.13
-pu
(Unbind Target)
Type the following command to unbind a persistently bound target:
-pu <HBA No.> <Target ID>
5.14
-px
(Unbind all Targets)
Type the following command to unbind all persistently bound targets on the HBA:
-px <HBA No.>
5.15
-r
(Update ROM Image)
Type the following command to update the specified HBA’s ROM:
-r <HBA No.> <File Name>
The <HBA No.> parameter indicates the HBA instance to update. The <File Name>
parameter is the file containing the ROM image to upload to the HBA.
5.16
-t
(List Targets)
Type the following command to display target information:
-t <HBA No.> [Target ID]
When only the <HBA No.> parameter is specified, target information for all targets
on the specified HBA port is displayed. When the optional parameter
[Target ID]
is specified, only information on the specified target is displayed.
5.17
-ping
(Ping IP Address)
Type the following command to ping the specified IP address:
-ping <HBA No.> <IP Address> <Ping Count>