User`s guide

5 – Non-interactive Mode Commands
-pb (Bind Target)
SN0054621-00 B 5-5
Q
5.10
-pa
(Add a Target)
Type the following command to add persistent targets:
-pa <HBA No.> <IP Address> [-PORT port number] [-INAME iSCSI Name]
When the optional parameter [-PORT port number] is not specified, the default
number 3260 is used. When the optional parameter
[-INAME iSCSI Name] is not
used, the default is an empty string.
5.11
-ps
(Display Persistent (Bound Targets))
Type the following command to display persistently bound targets for the HBA port:
-ps <HBA No.> [Target ID]
When the optional parameter [Target ID] is not specified, all targets for the
specified HBA port number are displayed. When neither the
[HBA No.] nor
[Target ID]
parameters are specified, then all target IDs for all HBA ports in the
system are displayed.
5.12
-pb
(Bind Target)
Type the following command to persistently bind a target:
-pb <HBA No.> <Target ID>
TCP_DHCP TCPDHCP on or off
TCP_DNS_Via_DHCP DNS_DHCP on or off
TCP_SLP_DA_Via_DHCP DADHCP on or off
TCP_Nagle TCPN on or off
Miscellaneous Options
KeepAliveTO KATO 0–65535
MaxBurstLen MBL 0–65535
MaxOutstandingR2T MOR2T 0–65535
Table 5-2. HBA Parameters (Continued)
Configuration Name Configuration Alias Value