User`s guide

5 – Non-interactive Mode Commands
-l (List LUN Information)
SN0054621-00 B 5-3
Q
5.5
-g
(Display General System Information)
Type the following command to display general system information:
-g
The following information is displayed:
■ Host name
■ Host version
■ Host type
5.6
-h
(Display Help File)
Type the following command to display the SANsurfer iSCSi HBA CLI help file:
-h
5.7
-i
(List All QLogic iSCSI HBAs Detected)
Type the following command to display general HBA information:
-i [HBA No.]
When the HBA No. parameter is used, only information for that HBA port is displayed.
When the HBA No. parameter is not used, information for all HBA ports in the system
is displayed.
5.8
-l
(List LUN Information)
Type the following command to list the LUN information for the specified target:
-l <HBA No.> <Target ID [LUN ID]>
When the LUN ID parameter is not used, all the LUNs on the specified target are
displayed.