User`s guide

4 – Interactive Mode Commands
Diagnostic Menu
4-30 SN0054621-00 B
Q
4.7.7
List LUN Information
(Command Line Option -l)
This option allows you to view the following information about LUNs attached to the
selected target:
■ HBA/Target/LUN Number
■ Vendor name
■ Product ID
■ Product revision
■ LUN size
You can view this information for a specific LUN or for all LUNs attached to the
selected target.
For example:
iSCSI HBA Target Menu
HBA Target Menu
…
enter selection: 7
Target ID: 64 IP: 192.166.1.41 Port: 3260
iSCSI Name: iqn.1992-08.com.netapp:sn.51403494
Alias:drive4
State:Session Active
…
Enter a Target ID:64
Enter a LUN Number[60.64,65,63,66,100,103,105,104,50,<ALL>]:63
Vend = NETAPP
ProdID = LUN
ProdRv = 0.2
LunSize = 4.999 GB
Press the ENTER key to continue.
4.8
Diagnostic Menu
From the HBA Diagnostic Menu, the following options are available:
■ Ping Target (see section 4.8.1)
■ Perform Loopback Test (see section 4.8.2)
■ Perform Read/Write Buffer Test (see section 4.8.3)
■ Display HBA Statistics (see section 4.8.4)
Before making a selection from the HBA Diagnostic Menu, specify the HBA port
whose settings you want to view or change by typing the number for the Set Working
Adapter option, then press ENTER. A list of all iSCSI HBA ports is displayed. Type
the number for the HBA port whose settings you want to change, then press ENTER.