User`s guide

4 – Interactive Mode Commands

Reset HBA (Command Line Option -b)

SN0054621-00 B 4-23

For example:

iscli Main Menu

main Interactive Menu

-------------------------------------------------------

Current QLA4010 HBA/Port Information:

HBA Serial Number: FS2046A08466 HBA Port: 0

IP Address: 192.168.8.18 Link: Up

Port Name: iqn.200-04.com.qlogic:qla4010.fs20446a08466

Port Alias:

-------------------------------------------------------

1. Display General System Information

2. Display Program Version Information

3. List All QLogic iSCSI HBAs detected

4. HBA Options Menu

5. HBA Information

6. Reset HBA

7. Target Menu

8. Diagnostic Menu

9. Display VPD Information

10. Set Working Adapter

11. Exit

enter selection:5

Board Type: : QLA4010

Chip Version : 4

Serial Number : FS20446A08466

MAC Address : 00-C0-DD-01-00-01

Driver Version : 2.1.1.0 <SCSI w32>

Firmware Version : 3.0.0.4

ROM Version : 2.0.0.0

iSCSI Version: : 0.20

Bootcode Version: : 1.11

Connection Type : Copper

Portal Flow Control : off

Portal Duplex : off

Portal Link Speed : 1000 Mbs

Press the Enter key to continue.

4.6

Reset HBA

(Command Line Option -b)

Select this option to reset the HBA after making configuration changes.

NOTE: Bootcode mode must be disabled (see section 4.4.3.2) for the HBA to be

reset.