User`s guide

4 – Interactive Mode Commands

HBA Options Menu

SN0054621-00 B 4-21

4.4.3.3

Set Primary Boot Target Information

(Command Line Option -pbootcode)

This option allows you to select the primary target from which to boot. At the prompt,

enter a target ID and associated LUN.

4.4.3.4

Set Secondary Boot Target Information

(Command Line Option -sbootcode)

This option allows you to select the secondary target from which to boot. At the

prompt, enter a target ID and associated LUN.

4.4.3.5

Clear Primary Target Information

(Command Line Option -cpbootcode)

This option allows you to disable the primary boot target. At the prompt, enter a

target ID and associated LUN.

4.4.3.6

Clear Secondary Primary Target Information

(Command Line Option -csbootcode)

This option allows you to disable the secondary boot target. At the prompt, enter

enter a target ID and associated LUN.

4.4.3.7

Set Alternative Client ID

(Command Line Option -sbootcodecid)

This option allows you to assign an optional alternate client ID, which can be used

in boot DHCP mode. The ID can be seven characters maximum.

4.4.3.8

Update Bootcode Code Image

(Command Line Option -bootcode)

This option updates the bootcode code image, which should be done when QLogic

releases a new bootcode with bug fixes or enhancements. At the prompt, enter the

name of the file containing the bootcode code image to upload to the HBA.