User`s guide

4 – Interactive Mode Commands

HBA Options Menu

SN0054621-00 B 4-19

4.4.2.5

Update Firmware Image

(Command Line Option -f)

This option updates the firmware image. At the prompt, enter the name of the file

containing the firmware image to upload to the HBA.

NOTE:

■ Before updating the firmware, be sure that no I/O processes are running.

■ Be sure to select the Save changes and reset HBA option afterwards;

otherwise, the change will not take effect.

4.4.2.6

Update ROM Image

(Command Line Option -r)

This option updates the ROM image. At the prompt, enter the name of the file

containing the ROM image to upload to the HBA.

NOTE:

■ Before updating the ROM image, be sure that no I/O processes are

running.

■ Be sure to select the Save changes and reset HBA option afterwords;

otherwise, the change will not take effect.

4.4.2.7

Get Crash Record

(Command Line Option -gcr)

This option allows you to obtain crash record information for the HBA. At the prompt,

enter a name and location for the crash file, then press ENTER. For example:

Crash File Name: c:\QLogic_Corporation\iscli\crash_record

4.4.3

HBA Bootcode Settings Menu

NOTE: If the BIOS version is less than 1.04, the Set Bootcode Mode option is

not supported (an error message is displayed).

Perform the following steps to edit the HBA bootcode settings:

1. Specify the HBA port whose settings you want to view or change by typing the

number for Set Working Adapter option, then press ENTER.

2. A list of all iSCSI HBA ports is displayed. Type the number for the HBA port

whose settings you want to change, then press ENTER.