User`s guide

4 – Interactive Mode Commands
HBA Options Menu
4-16 SN0054621-00 B
Q
■ iSCSI_Strict_Login
■ iSCSI_Alias
Each setting is displayed with the current value in brackets, for example:
iSCSI_Snack [off] :
To change the value, type the new value after the prompt. To keep the current value,
press ENTER at the prompt. The next iSCSI setting displays. The settings are
displayed one-by-one, in the order shown in the above list.
These settings are described in table 4-1.
4.4.2.3.3
Configure Firmware Settings
This option allows you to modify the following firmware settings:
■ FW_ZIO_Enable_Mode
■ AFW_Device_Timeouts
■ AFW_Delayed_ACK
■ AFW_AutoConnect
Each setting is displayed with the current value in brackets, for example:
AFW_Device_Timeouts [on] :
To change the value, type the new value after the prompt. To keep the current value,
press ENTER at the prompt. The next firmware setting displays. The settings are
displayed one-by-one, in the order shown in the above list.
These settings are described in table 4-1.
4.4.2.3.4
Configure Device Settings
This option allows you to modify the following device settings:
■ iSCSI_Snack
■ iSCSI_Discovery_Logout
■ iSCSI_Strict_Login
■ TCP_SLP_Use_DA
■ TCP_Auto_Discovery
■ TCP_SLP_UA
■ TCP_SLP_SA
■ TCP_DHCP
■ TCP_DNS_Via_DHCP
■ TCP_SLP_SA_Via_DHCP
■ TCP_Nagle
■ iSCSI_Alias
■ IP_Address