User`s guide

4 – Interactive Mode Commands

HBA Options Menu

4-14 SN0054621-00 B

4.4.2.2

Change HBA Alias Name

NOTE: This option is not available in non-interactive mode.

The HBA alias is a symbolic name you assign to the HBA for identification purposes.

To assign an HBA alias, enter the name at the prompt. The name can have

between 0 and 255 characters, and must be terminated with at least one NULL

character.

The HBA alias’ are communicated between the initiator and target at login, and can

be displayed on the PC monitor on both sides, making it easy to see if the initiators

and/or targets are correct. Do not use the alias to identify, address, or authenticate

initiators and targets.

4.4.2.3

Edit Configured HBA Settings Menu

Perform the following steps to edit the configured HBA settings:

1. Specify the HBA port whose settings you want to view or change by typing the

number for the Set Working Adapter option, then press ENTER.

2. A list of all iSCSI HBA ports is displayed. Type the number for the HBA port

whose settings you want to change, then press ENTER.

3. Make changes in the submenus, as described in the following sections:

■ Edit a Specific HBA Setting (see section 4.4.2.3.1)

■ Configure iSCSI Settings (see section 4.4.2.3.2)

■ Configure Firmware Settings (see section 4.4.2.3.3)

■ Configure Device Settings (see section 4.4.2.3.2)

■ Configure Basic Settings (see section 4.4.2.3.5)

■ Configure Advanced Settings (see section 4.4.2.3.6)

SLP_Address

— This parameter specifies where to look for

the SLP server.

ZIO 08h This parameter indicates the number of

completions the firmware posts to the

completion queue before interrupting the

host driver to indicate that there are items

in the queue. This parameter is valid only

when the FW_ZIO_Enable_Mode

parameter is on.

Tabl e No t e s

Read only

Table 4-1. HBA Firmware Settings (Continued)

Parameter Value Description