User`s guide

4 – Interactive Mode Commands
HBA Options Menu
SN0054621-00 B 4-9
Q
iSCSI_Header_Digests on, off When this parameter is on, iSCSi headers
with CRC protection can be transmitted.
In addition, incoming iSCSI headers are
validated and CRC protection is removed.
iSCSI_Data_Digests on, off When this parameter is on, iSCSi data
with CRC protection can be transmitted.
In addition, incoming iSCSI data is
validated and CRC protection is removed.
iSCSI_Immediate Data on, off When this parameter is on, the HBA
firmware negotiates (during login phase)
for Immediate Data=yes. When this
parameter is off, immediate data is
disabled and the firmware negotiates for
ImmediateData=no.
iSCSI_Initial_R2T on, off When this parameter is on, the HBA
negotiates (during the login phase) for
InitialR2T=yes. When this parameter is
off, initial R2T is disabled and the HBA
negotiates for InitialR2T=no.
iSCSI_Data_Seq_In_Order
a
on, of When this parameter is on, the system
driver reports the DataSequenceInOrder
value negotiated during login to the HBA
firmware.
iSCSI_Data_PDU_In_Order
a
on, off When this parameter is on, the system
driver reports the DataPDUInOrder value
negotiated during login to the HBA
firmware.
iSCSI_CHAP_Auth
a
on, off When this parameter is on, the HBA
performs authentication (during the
security stage of the login phase).
iSCSI_Bidi_CHAP_Auth
a
on, off When this parameter is on, the HBA (as
an initiator) generates a CHAP challenge
to any target that has issued a CHAP
challenge to the HBA.
This bit is ignored if the
iSCSI_CHAP_Auth parameter is off.
Table 4-1. HBA Firmware Settings (Continued)
Parameter Value Description