User`s guide

4 – Interactive Mode Commands

HBA Options Menu

4-2 SN0054621-00 B

■ iSCSI name (HBA port iSCSI name. The QLogic manufacturing default name or

a name that you assign.)

■ Alias (HBA port iSCSI alias name. Symbolic name you assign to the HBA for

identification purposes.)

■ IP address (IP address of the HBA port)

■ Instance (driver ID number)

For example:

1. HBA Model: QLA4052C HBA Serial Number: FS20525B03135 HBA Port: 0

iSCSI name: iqn.1991-05.com.micorsfot:al-ibm

Alias: MYHBA

IP Address: 192.168.3.7 Instance #: 0

2. HBA Model: QLA4052C HBA Serial Number: FS20525B03135 HBA Port: 1

iSCSI name: iqn.1991-05.com.micorsfot:al-ibm

Alias: MYHBA

IP Address: 192.168.3.8 Instance #: 1

4.4

HBA Options Menu

Before making a selection from the HBA Options Menu, perform the following steps:

1. Specify the HBA port whose settings you want to view or change by typing the

number for the Set Working Adapter option, then press ENTER.

2. A list of HBA ports is displayed. Type the number for the HBA port whose

settings you want to change, then press ENTER.

3. Make changes in the submenus, as described in the following sections:

■ HBA Network Settings (see section 4.4.1)

■ HBA Firmware Settings (see section 4.4.2)

■ HBA Bootcode Settings (see section 4.4.3)

■ HBA Restore Factory Defaults (see section 4.4.4)

a. For each submenu, save the changes by typing the number for the Save

changes and reset HBA option, then press ENTER.

b. To update the firmware with these changes, type the number for the Refresh

option, then press ENTER. If you do not select this option, your changes will

not be visible in SANsurfer iSCSI HBA CLI.