User`s guide
SN0054621-00 B 4-1
Section 4
Interactive Mode Commands
The following sections describe the interactive command line options listed in
table 2-1. See section 5 for a description of the commands available in
non-interactive (command line) mode.
Before making a selection from the Main Menu, specify the HBA whose settings
you want to view or change by performing the following steps:
1. From the Main Menu, type 10 (Set Working Adapter), then press ENTER.
2. A list of iSCSI HBA ports is displayed. Type the number for the HBA port whose
settings you want to change, then press ENTER.
4.1
Display General System Information
(Command Line Option -g)
When this option is selected, the following information is displayed:
■ Host name
■ Host version
■ Host type
4.2
Display Program Version Information
(Command Line Option -ver)
When this option is selected, the following information is displayed:
■ iSCSI HBA CLI program version
■ iSCSI SAN device manager API (iSDMAPI)
4.3
List All QLogic iSCSI HBAs Detected
(Command Line Option -i)
When this option is selected, the following information is displayed for all the HBA
ports in the system:
■ HBA model (HBA name, for example, QLA4010)
■ HBA serial number
■ HBA port number