User`s guide

SANsurfer iSCSI HBA CLI Application User’s Guide
Command Line Interface for SANblade iSCSI Host Bus Adapters
Q
Page ii SN0054621-00 B
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described
in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no representation
nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic
Corporation assumes no responsibility for any errors that may appear in this document.
No part of this document may be copied nor reproduced by any means, nor translated nor transmitted to any magnetic
medium without the express written consent of QLogic Corporation.
Linux is a registered trademark of Linus Torvalds.
Microsoft and Windows are registered trademarks and Windows Server is a trademark of Microsoft Corporation.
QLA, QLogic, SANsurfer, and the QLogic logo are registered trademarks of QLogic Corporation.
SANsurfer Manager Suite is a trademark of QLogic Corporation.
Red Hat and all Red Hat-based trademarks are trademarks or registered trademarks of Red Hat, Inc.
Solaris is a registered trademark of Sun Microsystems, Inc.
SPARC is a registered trademark of SPARC International, Inc. Products bearing SPARC trademarks are based on
an architecture developed by Sun Microsystems, Inc.
SUSE is a registered trademark of Novell, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Document Revision History
Rev. A, 9/30/05
Rev. B, 11/10/05
Changes Document Sections Affected
Supported operating systems, SuSE
®
Linux Enterprise Server
(SLES) 8: removed IEM64.
1
Added reset HBA option (-b command in non-interactive mode). 2.2, 2.3, 4.6, 5.2
Added information about the installation package name. 3.1
Changed Windows installation instructions. 3.1.1
Red Hat/SuSE Linux/PCC installation instructions: noted that in SuSE
Linux/PPC, the /usr/local/bin directory must be manually added to the
execution path.
3.1.2
Changed Solaris installation instructions. 3.1.3
Added un-install instructions. 3.2
Corrected TCP_SLP_SA_Via_DHCP device setting name. 4.4.2.3.4, 4.4.2.3.5
-n command: noted that the HBA will be reset after this command. 5.9
-rwt command: added -CNT to command parameters. 5.19
-netconf command: removed dash (–) in front of IPNM. 5.33
-bootcodemode command: added <HBA No.> parameter. 5.38
-bootcode command: added <HBA No.> parameter. 5.39
-sbootcodecid command: added <HBA No.> parameter. 5.40
Added index. Index