User`s guide

SANsurfer iSCSI HBA CLI Readme Page 2 of 10
2 Requirements
This section defines the following minimum requirements:
 2.1 Hardware Requirements
 2.2 Software Requirements
2.1 Hardware Requirements
SANsurfer iSCSI HBA CLI requires the following minimum hardware:
 QLogic 4000 Series iSCSI Adapter
 Single- or multi-processor server or workstation
 Pentium II class 300MHz, 64MB RAM, 1MB disk space
2.2 Software Requirements
SANsurfer iSCSI HBA CLI requires the following minimum software:
 QLogic 4000 Series Adapter drivers
3 OS Support
SANsurfer iSCSI HBA CLI runs on the following OS platforms:
Operating Systems
Windows OS Name OS Type Hardware Platform
Windows Server 2008
32-bit
x86, AMD64
Windows Server 2008
64-bit
AMD64, Intel 64
Linux OS Name OS Type Hardware Platform
RHEL AS and ES 6.0
32-bit
x86
RHEL AS and ES 6.0
64-bit
Intel 64, AMD64
RHEL AS and ES 5.5 and 5.6
32-bit
x86
RHEL AS and ES 5.5 and 5.6
64-bit
Intel 64, AMD64
Novell SLES 11 SP1
32-bit
x86
Novell SLES 11 SP1
64-bit
Intel 64, AMD64
Novell SLES 10 SP3 and SP4
32-bit
x86
Novell SLES 10 SP3 and SP4
64-bit
Intel 64, AMD64
NOTE: For specific OS service packs (SPs) and updates, refer to the descriptions where this
software version is posted on the QLogic Web site:
http://driverdownloads.qlogic.com
4 Supported Features
The SANsurfer iSCSI HBA CLI (iscli) function set closely mirrors the functionality provided in
the SANsurfer iSCSI HBA Manager (GUI) utility. You can use iscli as an alternative to the
GUI to view, configure, and diagnose the 4000 Series iSCSI Adapters.
NOTE: For detailed user information, syntax, and command options, refer to the SANsurfer
iSCSI HBA CLI User's Guide.